Updated Oct 22, 2026

ProbitSite App 1.3 now available: highlights from our second Distributor Conference

On 21 October 2026 we welcomed our distribution partners from Europe, Asia and Oceania to the second ProbitSite Distributor Conference, held online. The centrepiece was a live demonstration of the ProbitSite Windows App 1.3 and its extended diagnostic functions, which is now available to all users.

ProbitSite App 1.3 for Windows showing a DALI scan with per-device signal quality and the DALI Log window with system events, DALI frames, idle times and a highlighted bit time violation — ProbitSite App 1.3: scan results with per-device signal quality, and the new DALI Log view with decoded DALI frames and highlighted bit-timing violations.

What's new in ProbitSite App 1.3

Until now, the ProbitSite Windows App has been the place to import scans, organise them by project and produce test reports. Version 1.3 adds a dedicated DALI Log view that turns recorded bus traffic into something an installer can read and act on.

DALI Log visualisation: system events such as scan start and scan end alongside every recorded DALI frame, each with timestamp, idle time to the previous frame and decoded address.
Bit-timing violations highlighted: frames that break the DALI timing are marked directly in the log, so physical layer problems become visible next to the traffic that caused them.
Per-device signal quality in the scan view: each device on the bus is listed with its DALI version, certification status, short and random address, and a green, yellow or red signal quality indicator.
Search, export and chart: filter frames, export the log as CSV, or open it as a chart for further analysis.

App 1.3 works with ProbitSite firmware V1.2 or higher. For the full feature set, including Expert Mode, we recommend firmware V1.5, available on Support & Downloads.

Coming next: firmware 1.6 with DALI Configuration Swap

Firmware 1.6, planned for the end of 2026, brings DALI Configuration Swap. ProbitSite reads the complete DALI configuration from a device, and after the faulty control gear has been replaced, writes the saved configuration into the new one. The control system sees the same device it saw before, with no recommissioning and no PC on site. Firmware 1.6 also extends on-device editing to the common DALI parameters, building on the short address editing introduced with Expert Mode in firmware 1.5.

Where ProbitSite stands

More than 600 ProbitSite units are now in use across all markets, supported by 17 distribution partners. Since the first conference, Nylund (Finland), MCS (Portugal) and Kitoko Group (Türkiye, Georgia, Azerbaijan) have joined the network. The ProbitSite product pages are now available in thirteen languages, most recently Turkish, plus a dedicated version for Switzerland, and our DALI Knowledge Base documents real fault cases for the person on site.

Many thanks to all partners who joined, asked questions and shared their own DALI cases from the field. The next distributor conference is planned for spring 2027.

Find your nearest partner on our Distributors page.