ProbitGears

ProbitGears delivers an unique potential for testing DALI control devices. It simulates up to 65 control gears like LED drivers, emergency lighting or phase cut dimmers in parallel, covering the whole address space of any DALI system.

ProbitGears is a small box with a DALI interface. On the back it is connected and powered via USB. The PC software grants full access to every detail of the simulations inside. Every event is visualized, recorded and actually can be modified at run time.

▸ Details

Key facts

·     Simulation
Up to 65 control gears
Multiple device types
Real time visualization and modifying access
·     System Level Test
Full size virtual installation
Testing the behaviour of control devices
Simulation of each individual bit timing
·     ProbitBench Software
Simulator tab with property grid
Configurable overview and comparison sheet
Luminaire representative desktop icons
·     Pocket sized box
Enabling labs to share one system

Technical specification

·     2 x 4mm laboratory jack for DALI
·     MiniUSB connector to PC (min. 400mA USB supply power required)
·     Size approx. 94mm x 144mm x 26mm
·     Weight approx. 180g

▸ Downloads


 ProbitGears V4.6.zip


2023-08-07

Description

·     ProbitGears firmware
·     It is recommended to use the latest Probit driver


New changes

·     For ProbitBench V4.4.0.0 and higher
·     Bus line status issues fixed
·     Memory bank issues fixed
·     Simulated power up issues fixed
·     Simulated battery issues fixed


››   Previous changes



 Probit Driver Package 2.12.36.4 WHQL.zip


2021-08-30

Description

·     Probit hardware driver
·     WHQL certified
·     Note: Previous non-WHQL drivers have no signature so that on some Windows OS versions (e.g. 64-bit versions) you need to install them in a special mode. Follow these instructions.


New changes

·     WHQL certified
·     ProbitDongle device added


››   Previous changes


▸ FAQ



Does the ProbitGears simulate the physical load of each control gear?

·     Answer: No. Due of the wide variety of possible load characteristics this property will not be simulated. Any load simulation and testing has to be done manually by the user. The ProbitGears is designed to cause a minimal load based on its own operation and transceiver circuit (high impedance OPA receiver and MOSFET transmitter).