Lichtvision Engineering

HOME

·	ProbitBench
·	ProbitLab2
·	ProbitGears
·	ProbitLab (EOL)

Services

·	DALI Testing

ProbitLab2
The ProbitLab2, as successor of the ProbitLab, is a platform for testing of IEC62386 Edition1 & Edition2 control gears, control devices and bus power supplies to improve the interoperability. The ProbitLab2 together with the ProbitBench enables to run the IEC62386 normative test sequences distributed by the DIIA. All together they are the authorized test equipment for product approval and registration in order to bear the logo of the DIIA.

▸ Details

Key facts

· Signal generator
Adjustable high and low voltage
Adjustable rise and fall times
Adjustable current limiter

· Connectivity
For external oscilloscope and ampere meter
Switchable AC and DC DUT supply input
4 high capacity switching relay outputs
4 digital outputs
2 digital inputs
2 analog inputs

· Product certification
Running the IEC62386 Edition1 & Edition2 test procedures

· ProbitBench software
Selection and control of test procedures
Send individual commands
Sniffer for analyzing telegrams
BitScope for analyzing the bus signal timing

· 19" rack mount design
For integration in existing laboratary equipment

Technical specification

· Supply voltage 85V to 230V (5A medium delay fuse protection)

· AC DUT supply input up to 277VAC/4A
DC DUT supply input up to 30VDC/4A

· Double circuit breaker for DUT supply input voltage protection (C4 characteristic)

· High capacity switching relay output up to 277VAC/10A or 30VDC/10A

· Digital output is 5VDC and up to 20mA

· Input range of the digital inputs is 5V - 230VAC/VDC
(Minimum 5mA input source required)

· Input range of analog inputs is -10V to +10V
(Input resistance 115kOhm)

· Size approx. 483mm x 132mm x 252mm

· Weight approx. 7.1kg

▸ Downloads

ProbitLab2 V4.14.zip

2024-02-23

Description

· ProbitLab2 firmware

· It is recommended to use the latest Probit driver

New changes

· For ProbitBench V4.5.0.0 and higher

· Added support for multiple frame detect with bit frame transmission trigger

· Internal optimizations

›› Previous changes

Changes related to ProbitLab2 V4.13:

· For ProbitBench V4.3.3.0 and higher

· Internal optimizations

Changes related to ProbitLab2 V4.12:

· For ProbitBench V4.3.0.0 and higher

· Revised communication protocol for future needs

Changes related to ProbitLab2 V4.11:

· For ProbitBench V4.2.8.0

· Revised communication protocol for future needs

· Bugfix usage of internal I2C bus

Changes related to ProbitLab2 V4.10:

· For ProbitBench V4.2.5.0, V4.2.6.0 and V4.2.7.0

· Revised communication protocol for future needs

· Note: This update allows higher accuracy of analog voltage measurement of the DALI input and the DALI input receiver thresholds. To make use of it, please calibrate with the Probit Calibrator Tool V4.3 (see below).

Changes related to ProbitLab2 V4.9:

· For ProbitBench V4.2.1.0, V4.2.2.0 and V4.2.3.0

· Optimization of firmware to run 3xx test sequences

· Optimization of transmission timings

Changes related to ProbitLab2 V4.8:

· For ProbitBench V4.2.0.0

· Revised communication protocol for future needs

· Bus receiving optimized

· Bugfix transmission timing issue

Changes related to ProbitLab2 V4.7:

· For ProbitBench V4.2.0.0

· Revised communication protocol for future needs

· Relay switching behaviour optimized

· Receive / Transmit LED blinking behaviour optimized

· Bus receiving optimized to allow faster transmissions by ProbitBench

· Bugfix 15 bit frame transmission issue

· Bugfix resync issue

Changes related to ProbitLab2 V4.6:

· For ProbitBench V4.1.0.0 and V4.1.1.0

· Revised communication protocol for 103 and future needs

Changes related to ProbitLab2 V4.5:

· For ProbitBench V4.0.0.4 and V4.0.0.5

· Revised communication protocol for future needs

Changes related to ProbitLab2 V4.4:

· For ProbitBench V4.0.0.3

· Bugfix regarding frame transmission handling

Changes related to ProbitLab2 V4.3:

· For ProbitBench V4.0.0.2

· Bugfix regarding sporadic communication errors

Changes related to ProbitLab2 V4.2:

· For ProbitBench V4.0.0.2

· Revised communication protocol for future needs

Changes related to ProbitLab2 V4.1:

· For ProbitBench V4.0.0.1

· Bugfix regarding transmission of a frame sequence

Changes related to ProbitLab2 V4.0:

· For ProbitBench V4.0.0.1

· Introduction firmware version

Probit Calibrator Tool V4.3.zip

2019-11-16

Description

· Calibration tool for ProbitLab2

· For ProbitLab V4.10 and higher

· To calibrate the analog voltage measurement of the DALI input and the DALI input receiver thresholds.

· Note: Please follow the instructions of the tool very closely.
It is recommended to calibrate the ProbitLab2 device after upgrading to 4.10 only once.
Please make sure the ProbitLab2 device is warmed up before calibration.
We recommend to let operate the device under normal conditions for ca. 1 hour before.

Probit Driver Package 2.12.36.4 WHQL.zip

2021-08-30

Description

· Probit hardware driver

· WHQL certified

· Note: Previous non-WHQL drivers have no signature so that on some Windows OS versions (e.g. 64-bit versions) you need to install them in a special mode. Follow these instructions.

New changes

· WHQL certified

· ProbitDongle device added

›› Previous changes

Changes related to Probit driver 2.12.28:

· Driver optimizations

· ProbitSite device added

Changes related to Probit driver 2.12.06:

· Driver optimizations

· ProbitLab2 device added

Changes related to Probit driver 2.08.24:

· Driver optimizations

· preliminary Windows 8 driver installation added

Changes related to Probit driver 2.08.02:

· Windows 7 compatibility added

ProbitLab2 - Getting Started.pdf

2017-05-10

Description

· How to get started with ProbitLab2

ProbitLab2 - Example.pdf

2017-05-10

Description

· Example of DUT connection to ProbitLab2

▸ FAQ

Why the ProbitLab2 is not running?

· Answer: Please make sure the main supply is connected correctly to the ProbitLab2 and the main supply switch at the back side is on.

· Answer: Please make sure the emergency button is not pressed.

Why I cannot measure a voltage at the DALI terminals?

· Answer: After power up of the ProbitLab2 the DALI terminals are disabled. After connecting with the ProbitBench software you are able to activate the integrated DALI bus power supply.