ProbitLab2 | DALI Approbation & Certification Tool

The ProbitLab2 is the only approved DALI approbation & certification tool. It is the successor of the ProbitLab, a platform for testing of IEC62386 Edition1 & Edition2 control gears, control devices and bus power supplies to improve the interoperability. You can also use it to optimize your DALI development projects.

The ProbitLab2 together with the ProbitBench enables to run the IEC62386 normative test sequences distributed by the DALI Alliance (DiiA).

Overall, ProbitLab2 is the authorized DALI approbation & certification tool for product approval and registration to carry the DALI Alliance logo.

Together with our ProbitBench software suite, it forms the ideal DALI development environment. Ensure that your DALI product meets the standard and fulfills the requirements of real installations.

ProbitLab2 | DALI Approbation & Certification Tool, DALI development environment, IEC62386

Key facts – DALI Approbation & Certification Tool

  • Signal generator
    Adjustable high and low voltage
    Adjustable rise and fall times
    Adjustable current limiter
  • Connectivity
    For external oscilloscope and ampere meter
    Switchable AC and DC DUT supply input
    4 high capacity switching relay outputs
    4 digital outputs
    2 digital inputs
    2 analog inputs
  • Product certification
    Running the IEC62386 Edition1 & Edition2 test procedures
  • ProbitBench software
    Selection and control of test procedures
    Send individual commands
    Sniffer for analyzing telegrams
    BitScope for analyzing the bus signal timing
  • 19″ rack mount design
    For integration in existing laboratary equipment
  • DALI Development environment
    Optimize your DALI development projects

Technical specification

  • Supply voltage 85V to 230V (5A medium delay fuse protection)
  • AC DUT supply input up to 277VAC/4A
  • DC DUT supply input up to 30VDC/4A
  • Double circuit breaker for DUT supply input voltage protection (C4 characteristic)
  • High capacity switching relay output up to 277VAC/10A or 30VDC/10A
  • Digital output is 5VDC and up to 20mA
  • Input range of the digital inputs is 5V – 230VAC/VDC (Minimum 5mA input source required)
  • Input range of analog inputs is -10V to +10V (Input resistance 115kOhm)
  • Size approx. 483mm x 132mm x 252mm
  • Weight approx. 7.1kg

Lichtvision Engineering GmbH

Contact infos



Fritschestrasse 27/28
10585 Berlin, Germany



T +49 30 21 28 91 - 0
F +49 30 21 28 91 - 21




© 2021 Lichtvision Engineering GmbH - All rights reserved

Imprint | Cookie Policy | Declaration of data protection | Privacy Statement