ProbitLab (EOL) – Downloads & FAQs

Downloads


ProbitLab V4.12.zip (2021-09-22)

Description

  • ProbitLab firmware
  • It is recommended to use the latest Probit driver

New changes

  • For ProbitBench V4.3.0.0 and higher
  • Revised communication protocol for future needs
Previous changes

Changes related to ProbitLab V4.11:
· For ProbitBench V4.2.8.0
· Revised communication protocol for future needs

Changes related to ProbitLab V4.10:
· Discarded version, do not use anymore

Changes related to ProbitLab V4.9:
· For ProbitBench V4.2.5.0, V4.2.6.0 and V4.2.7.0
· Revised communication protocol for future needs

Changes related to ProbitLab V4.8:
· For ProbitBench V4.2.1.0, V4.2.2.0 and V4.2.3.0
· Revised communication protocol for future needs
· Bugfix transmission timing issue

Changes related to ProbitLab V4.7:
· For ProbitBench V4.2.0.0
· Revised communication protocol for future needs
· Relay switching behaviour optimized
· Digital In logic inverted to comply with ProbitLab2 behaviour

Changes related to ProbitLab V4.6:
· For ProbitBench V4.1.0.0 and V4.1.1.0
· Revised communication protocol for 103 and future needs

Changes related to ProbitLab V4.5:
· For ProbitBench V4.0.0.4 and V4.0.0.5
· Revised communication protocol for future needs

Changes related to ProbitLab V4.4:
· For ProbitBench V4.0.0.3
· Bugfix regarding frame transmission handling

Changes related to ProbitLab V4.3:
· For ProbitBench V4.0.0.2
· Revised communication protocol for future needs

Changes related to ProbitLab V4.2:
· For ProbitBench V4.0.0.1
· Bugfix regarding transmission of a frame sequence

Changes related to ProbitLab V4.1:
· For ProbitBench V4.0.0.1
· Revised communication protocol for future needs and new devices

Changes related to ProbitLab V4.0:
· For ProbitBench V4.0.0.0
· Revised communication protocol for future needs and new devices

Changes related to ProbitLab V3.4:
· For ProbitBench V3.0.0.4 to V3.0.0.5
· Changes required for IEC62386 Ed2 usage
· Optimization for faster and stable DALI transmissions
· Bugfix regarding calculation of DALI voltages
· Bugfixes, changes and optimization regarding communication protocol

Changes related to ProbitLab V3.2:
· For ProbitBench V3.0.0.2
· Command extension of communication protocol
· Bugfixes regarding communication protocol

Changes related to ProbitLab V3.1:
· For ProbitBench V3.0.0.1
· Bugfixes regarding communication protocol

Changes related to ProbitLab V3.0:
· For ProbitBench V3.0.0.0
· Revised communication protocol for future needs and new devices

Changes related to ProbitLab V1.9:
· For ProbitBench V2.0.5.4 to V2.0.6.0
· New features for pc-independent precise timing solutions


Probit Driver Package 2.12.36.4 WHQL.zip (2021-08-30)

Description

  • Probit hardware driver
  • WHQL certified
  • Note: Previous non-WHQL drivers have no signature so that on some Windows OS versions (e.g. 64-bit versions) you need to install them in a special mode. Follow these instructions.

New changes

  • WHQL certified
  • ProbitDongle device added
Previous changes

Changes related to Probit driver 2.12.28:
· Driver optimizations
· ProbitSite device added

Changes related to Probit driver 2.12.06:
· Driver optimizations
· ProbitLab2 device added

Changes related to Probit driver 2.08.24:
· Driver optimizations
· preliminary Windows 8 driver installation added

Changes related to Probit driver 2.08.02:
· Windows 7 compatibility added


FAQs

Why the ProbitLab is not running?

Answer: Please make sure the main supply is connected correctly to the ProbitLab and the main supply switch at the back side is on.
Answer: Please make sure the emergency button is not pressed.

Why I cannot measure a voltage at the DALI terminals?

Answer: After power up of the ProbitLab the DALI terminals are disabled. After connecting with the ProbitBench software you are able to activate the integrated DALI bus power supply.
Answer: Please make sure you have either connected an ampere meter correctly to the current measurement terminals or bypass these terminals with the delivered short-circuit adapter.

Lichtvision Engineering GmbH

Contact infos

address-icon
Address

Fritschestrasse 27/28
10585 Berlin, Germany

phone-icon
Phone

T +49 30 21 28 91 - 0
F +49 30 21 28 91 - 21

email-icon
Email

contact@lichtvision-engineering.com


LICHTVISION

© 2025 Lichtvision Engineering GmbH - All rights reserved

Imprint | Cookie Policy | Declaration of data protection | Privacy Statement