ProbitGears – Downloads & FAQs

Downloads


ProbitGears V4.6.zip (2023-08-07)

Description

  • ProbitGears firmware
  • It is recommended to use the latest Probit driver

New changes

  • For ProbitBench V4.4.0.0 and higher
  • Bus line status issues fixed
  • Memory bank issues fixed
  • Simulated power up issues fixed
  • Simulated battery issues fixed
Previous changes

Changes related to ProbitGears V4.5:
· For ProbitBench V4.3.0.0 and higher
· Revised communication protocol for future needs
· 209 issues fixed

Changes related to ProbitGears V4.4:
· For ProbitBench V4.2.8.0
· Revised communication protocol for future needs
· 207 support added
· 209 updated and issues fixed
· Segment setting handling updated

Changes related to ProbitGears V4.3:
· For ProbitBench V4.2.0.0, V4.2.1.0, V4.2.2.0, V.4.2.3.0, V4.2.5.0, V4.2.6.0 and V4.2.7.0
· Revised communication protocol for future needs

Changes related to ProbitGears V4.2:
· For ProbitBench V4.1.0.0 and V4.1.1.0
· Revised communication protocol for future needs
· Received frames are evaluated according Ed1 and Ed2 and reported back to ProbitBench
· 202 optimizations and bugfixes
· 209 optimizations and bugfixes

Changes related to ProbitGears V4.1:
· For ProbitBench V4.0.0.4 and V4.0.0.5
· Revised communication protocol for future needs
· 209 standard capabilities
· Bugfixes regarding some 202 commands
· Bugfixes regarding stop of updating the ProbitBench
· Bugfixes regarding serial communication errors
· Bugfixes regarding answer time jitter
· Bugfixes regarding resetting the device

Changes related to ProbitGears V4.0:
· For ProbitBench V4.0.0.3
· Memory bank access

Changes related to ProbitGears V3.3/V3.4:
· For ProbitBench V3.0.0.5 to V4.0.0.2
· Introduction firmware version


FAQs

Does the ProbitGears simulate the physical load of each control gear?

Answer: No. Due of the wide variety of possible load characteristics this property will not be simulated. Any load simulation and testing has to be done manually by the user. The ProbitGears is designed to cause a minimal load based on its own operation and transceiver circuit (high impedance OPA receiver and MOSFET transmitter).

Lichtvision Engineering GmbH

Contact infos

address-icon
Address

Fritschestrasse 27/28
10585 Berlin, Germany

phone-icon
Phone

T +49 30 21 28 91 - 0
F +49 30 21 28 91 - 21

email-icon
Email

contact@lichtvision-engineering.com


LICHTVISION

© 2025 Lichtvision Engineering GmbH - All rights reserved

Imprint | Cookie Policy | Declaration of data protection | Privacy Statement